Green Product

Think Green Product: Epoxy 200



Description:
Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete

Purpose: Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.

Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with Polyurethane 100 or Polyurethane 501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs.

Limitations:

  • Clear material not suitable for exterior use.

Kit Sizes:

  • 1 1/2 Gallons
  • 15 Gallons

Color & Finishes:
16 standard colors available, plus clear

Technical Datasheet:
Epoxy 200
MSDS:
Epoxy 200 Clear
Epoxy 200 Pigmented


Standard Color Chart

Arizona Polymer Flooring offers these colors in all of our pigmented polymer coatings; Epoxy, Polyureathane, Polyurea and Acrylic.
Colors shown are approximate. Colors provided may vary depending on the coating system and normal production tolerance.

Click on the color chart below to see the full PDF Color Chart

APF Standard Color Chart
* A premium will be charged for these colors.

Copyright Western Hardscape Supply, Inc. © 2017. All Rights Reserved.